Indoor Air Quality Testing & Mold Inspection Safety: Dallas / Fort Worth

Through my years of performing environmental testing in the DFW Metroplex area, I have evaluated numerous risk factors that impact human health from the perspectives of both short term (acute effects) and long term (chronic health issues) impacts.

ScanTech can check for the following key indoor air quality level indicators (many with time-based datalogging available) with rapid onsite results for the following key environmental hazards and atmospheric metrics:

  • Formaldehyde (HCHO)
  • VOCs (Volatile Organic Compounds) including benzene, toluene, hydrogen sulfide
  • Carbon Dioxide (CO2)
  • Carbon Monoxide (CO)
  • Respirable Dust Particles in PM2.5 (fine) and PM10 (coarse) size regimes
  • Oxygen Levels
  • HEPA Filtration and other air purifier efficiency
  • Relative ventilation levels – critical to know in newer homes that are tightly built

Optional services:

  • Radon Rn-222 Levels (known alpha emitter lung carcinogen) which requires at least 24 – 48 hours to develop
  • Mold inspection by a licensed Mold Assessment Consultant – State of Texas Dept. of Health Services License #MAC1387
  • Ozone levels for sensitive individuals
  • Hydrogen sulfide gas from sewer gas

along with atmospheric factors such as:

  • Temperature
  • Relative Humidity
  • Barometric Pressure (to judge whether the structure is under positive or negative pressure with respect to the outside air)

Many residents of the Dallas / Fort Worth area suffer from the following symptoms, ailments, and diseases – much of which can be traced either directly to air quality and composition or is exacerbated by poor air quality:

  • Allergies & Sinus Infections
  • Eye irritation
  • Congestion
  • Inflammation
  • Fatigue
  • Insomnia
  • Headaches
  • Dizziness
  • Cognitive issues including difficulty focusing
  • Nausea
  • Coughing
  • Asthma & other breathing difficulties (wheezing, tightness)
  • Bronchitis (irritation of the lung bronchi)

These issues can contribute to and/or be symptomatic of more serious ailments such as:

  • COPD (Chronic Obstructive Pulmonary Disease)
  • Carbon Monoxide / Carbon Dioxide Poisoning
  • Autoimmune Disease
  • Cardiovascular Disease
  • Stroke
  • Lung Cancer
  • Leukemia
  • Non-Hodgkin’s Lymphoma
  • Neurological issues due to chemical exposure and/or oxygen deprivation

In many cases, a simple series of air quality tests that detect and report important metrics such as respirable particle levels, VOCs, formaldehyde levels, radon gas, carbon monoxide, carbon dioxide, oxygen levels, etc. can narrow down the issue(s) responsible. Very often, mitigation is relatively inexpensive and well worth checking into.

While ScanTech can make suggestions on how to clean up your air, we are not an equipment vendor or installer, so there is no conflict of interest in selling you products that you don’t need. (or that may make things worse)

More information and blogs on this subject here:

http://www.indoorairqualitytestingdallas.com/

Leave a Reply

Your email address will not be published. Required fields are marked *